Enabeling OpenIntelWireless / itlwm

[tux-world 1]

after downloading latest version from this link, unzip and pasting kext to other folder inside clover, how can i enable it? should i use clover configuration ?

can you help me how can i do that?

wifi chipset:

Quote

Model: "Intel Centrino Advanced-N 6205 AGN"

 

PCI 2500.0: 0282 WLAN controller
[Created at pci.386]
Unique ID: S6TQ.sFdaNCNfTFB
Parent ID: Z7uZ.2fD530kY+A1
SysFS ID: /devices/pci0000:00/0000:00:1c.3/0000:25:00.0
SysFS BusID: 0000:25:00.0
Hardware Class: network
Device Name: "WLAN"
Model: "Intel Centrino Advanced-N 6205 AGN"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x0082 "Centrino Advanced-N 6205 [Taylor Peak]"
SubVendor: pci 0x8086 "Intel Corporation"
SubDevice: pci 0x1301 "Centrino Advanced-N 6205 AGN"
Revision: 0x34
Driver: "iwlwifi"
Driver Modules: "iwlwifi"
Device File: wlo1
Features: WLAN
Memory Range: 0xd9100000-0xd9101fff (rw,non-prefetchable)
IRQ: 33 (731374 events)
HW Address: 60:67:20:8f:5d:f4
Permanent HW Address: 60:67:20:8f:5d:f4
Link detected: yes
WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153
WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 5.18 5.2 5.22 5.24 5.26 5.28 5.3 5.32 5.5 5.52 5.54 5.56 5.58 5.6 5.62 5.64 5.66 5.68 5.7 5.745 5.765
WLAN encryption modes: WEP40 WEP104 TKIP CCMP
WLAN authentication modes: open sharedkey wpa-psk wpa-eap
Module Alias: "pci:v00008086d00000082sv00008086sd00001301bc02sc80i00"
Driver Info #0:
Driver Status: iwlwifi is active
Driver Activation Cmd: "modprobe iwlwifi"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #26 (PCI bridge)

 

Edited January 13 by tux-world

[Hackintosh Shop 248]

I think You need to edit the info.plist to manually set the SSID and Password