macOS BigSur Installation Failed

[vineethmn 0]

Hello Guys, I am trying to install macOS BigSur on my laptop, the installer giving error.

The Installer can't create the folder "//Install.180obbqfw".

any help how to bypass this?

[Hackintosh 345]

Please post a screenshot of error.

[usamaansari 0]

did you solve this problem

i am getting a same error

 

Edited March 23 by usamaansari

[Avijit Dutta 0]

I am also facing same problem after formatting SSD under GUID-APFS partition.

Please help..

[Hackintosh 345]

You guys are not selecting the Installation media correctly from the Installer, You are instead selecting the read only volume.

Select the correct volume, Read guide completely.

[Avijit Dutta 0]

I am using GUID - APFS formatted media. Still installation failed

[Avijit Dutta 0]

Most of the time it not allowing the choose the install drive

[m01 0]

Specs:-

AMD ryzen 5 3500, DDR4 ram 16gb 2x8gb, GT710 gddr3 2gb, Aorus B450 elite v2

in my system process of installing starts there are several lines of codes executed on my screen but afterward the following line "ok:AppleUserHIDEventDriver-0x10000047f::start(IOHIDInter-face-0x10000047d) fail " is shown and display signal is lost but CPU is still on......

 

video of error- https://drive.google.com/file/d/1xojTKG5VPAEgxfSIb_TxhZuHj1wgFqni/view?usp=sharing

Image Of Errorf (if you don't want to waste time seeing whole video) - https://drive.google.com/file/d/1Xatfos6h1TKGW2ztJv17wQ9yjGBCh4y9/view?usp=sharing

PLS HELP

[smestarz 0]

motherboard : Gigabyte B85M-D3H-a
Processor: Intel i5 4440
RAM : 16 GB Corsair
SSD : 1 TB Samsung QVO 870
GC  : GF 610

I have the bootable with Big Sur, also i added the EFI folder for Haswell chipset.

It works for about 20 minutes, then gets stuck on Running Package scrip page.

I waited for an hour. there was no hdd light, and to confirm, i pressed Num Lock key and it stopped and various lines of code started to come.

What wrong am I doing?

 

[Hackintosh 345]

On 4/21/2021 at 5:38 PM, Avijit Dutta said:

Most of the time it not allowing the choose the install drive

Close and Re Open The Installer, As Instructed in the Guide. Please read guide for Once.

[Hackintosh 345]

16 hours ago, smestarz said:

motherboard : Gigabyte B85M-D3H-a
Processor: Intel i5 4440
RAM : 16 GB Corsair
SSD : 1 TB Samsung QVO 870
GC  : GF 610

I have the bootable with Big Sur, also i added the EFI folder for Haswell chipset.

It works for about 20 minutes, then gets stuck on Running Package scrip page.

I waited for an hour. there was no hdd light, and to confirm, i pressed Num Lock key and it stopped and various lines of code started to come.

What wrong am I doing?

 

ReInstall, Keep moving the Mouse to prevent system from Sleeping.