HP tpn 1119 PRE BOOT
By
rohitd, in Hackintosh macOS Big Sur - Installation Support
Recommended Posts
rohitd 1
I added the patches to Clover, seemed to have progressed further but now stuck at this:
Hackintosh Shop 248
You must increase the internal graphics video memory in BIOS. Set it to max available.
rohitd 1
No option to do that in BIOS. Any other thing that i could try. High Sierra used to boot although with less VRAM.
Cant we do the same here?
Hackintosh Shop 248
Ok try this EFI for 5500
Copy it to a USB and Boot from it
rohitd 1
The posted EFI is not detecting the USB installer.
Also just copying the config is not booting as well.
Hackintosh Shop 248
What is the device id of HD5500 chip?
rohitd 1
It seems it is 1616 ? This is for HD 5500 from windows on the same machine
Hackintosh Shop 248
You just need FakePCIID.kext and FakePCIID_Intel_HD_Graphics
Also you must spoof your device as 0x1626 to avoid hang at boot.
rohitd 1
This helped booting. Successfully installed Big sur without GFX acceleration.
Applied Framebuffer fixes and have a stable OS.
Will have to fix Audio , Battery etc.
Thanks for your help.
-
1
Hackintosh Shop 248
Great you had it done everything yourself. I’m marking this post as solved.
If you post how you solved this it would be helpful for others.
If possible upload your EFI
Here,It might help other Hackintoshers...
https://community.hackintoshshop.com/files/category/11-clover-bootloader-hackintosh-big-sur/
The Clover Seems to work, For OpenCore Quirks needs to be set.
Copying the quirks from Clover Config to OpenCore Config should fix your OpenCore EFI.
To fix the Kernel Panic with Clover, Tick Kernel LAPIC Patch & Use Kernel CPU patch if required.
Do you have access to Mac? If not you can tick these options from Clover Bootloader Menu Options, but you have to do this every time, until you add it to Config.plist
Share this post
Link to post
Share on other sites