laptop Hp Pavilion dv6500 : Still waiting for root device

[alt 3]

I have an old laptop hp pavilion dv 6500 .After downloading High sierra and make bootable usb with Trans Mac setup now i am ready to install.

I have just one disk and there is no os on it and i want just install mac yet.SO i formatted my one partition into NTFS.

After rebooting my laptop and plug in usb, my laptop booted with usb mac.In boot menu i have ths:

https://pasteboard.co/JvrPrJD.jpg

And i select installer , But after a few second i got this message: 

https://pasteboard.co/JvrQfV4.jpg

 

Still waiting for root device ...

My laptop bios setting does not have any spacial thing and it is made 2007.

https://pasteboard.co/JvrQWoq.jpg

 

https://pasteboard.co/JvrR7B0.jpg

 

How can i fix that?

[alt 3]

I also added -v USBBusFix=Yes to boot but  it does not work too.

[Hackintosh 356]

What are the kexts that are available in the Chameleon Extra folder?

[alt 3]

I have these kexts:

/media/tazik/BOOTLOADER/EFI/CLOVER/CLOVER/kexts/Other
$ ls
ACPIBatteryManager.kext      FakeSMC.kext             Shiki.kext
AppleBacklightInjector.kext  HibernationFixup.kext    USBInjectAll.kext
BT4LEContiunityFixup.kext    IntelGraphicsFixup.kext  UVC2FaceTimeHD.kext
CoreDisplayFixup.kext        Lilu.kext                VoodooPS2Controller.kext

 

[alt 3]

[email protected]:/media/tazik/BOOTLOADER/Extra
$ ls
Extensions  kernel.plist  kexts.plist  modules.zip  org.chameleon.Boot.plist

 and

[email protected]:/media/tazik/BOOTLOADER/Extra/Extensions
$ ls
AppleNForceATA.kext   IOAHCIBlockStorageInjector.kext  VoodooPS2Keyboard.kext
ApplePCIIDE.kext      NullCPUPowerManagement.kext      VoodooPS2Mouse.kext
ATAPortInjector.kext  SuperVIAATA.kext                 VoodooPS2Trackpad.kext
DirectHW.kext         USBInjectAll.kext                XHCI-200-series-injector.kext
FakeSMC.kext          VoodooPS2Controller.kext         XHCI-x99-injector.kext

 

[Hackintosh 356]

AHCIPortInjector.kext is missing from the Install media, You might wanna download and Add to Extra kexts.

Download Still waiting for root device fix.

[alt 3]

7 hours ago, Hackintosher said:

AHCIPortInjector.kext is missing from the Install media, You might wanna download and Add to Extra kexts.

Download Still waiting for root device fix.

I downloaded AHCIPortInjector.kext and I added into 

/BOOTLOADER/Extra/Extensions

And 

/BOOTLOADER/EFI/CLOVER/CLOVER/kexts/Other

But I still got 

Still waiting for root device

[Hackintosh 356]

There are two legacy bootloader in the High Sierra USB, You could also try booting with Clover

After selecting USB as Primary boot device keep pressing number 6. It would boot into Clover bootloader.

You might want to add GenericUSBXHCI.kext like previous time.

[alt 3]

20 minutes ago, Hackintosher said:

There are two legacy bootloader in the High Sierra USB, You could also try booting with Clover

After selecting USB as Primary boot device keep pressing number 6. It would boot into Clover bootloader.

You might want to add GenericUSBXHCI.kext like previous time.

I downloaded your file and then i extracted it. After that i  added GenericUSBXHCI.kext folder from your file into /BOOTLOADER/EFI/CLOVER/CLOVER/kexts/Other and /BOOTLOADER/Extra/Extensions and when i booted my laptop in boot section i added -v 6 , But unfortunately i still have a same problem :  

Still waiting for root device

Edited October 14, 2020 by alt

[Hackintosh 356]

Did you try the Clover bootloader by pressing number 6?

Post lspci -nn output from Terminal here.

[alt 3]

1 hour ago, Hackintosher said:

Did you try the Clover bootloader by pressing number 6?

Post lspci -nn output from Terminal here.

I finally could boot my laptop by usb by Clover bootloader, but after selecting boot macos from hackintosh zone :

https://pasteboard.co/JvAzEyO.jpg

Noting is appeare on LCD and just black.

Where i have to run  lspci -nn ? where is terminal ? I have no OS on my laptop.

Edited October 14, 2020 by alt

[alt 3]

1 hour ago, alt said:

I finally could boot my laptop by usb by Clover bootloader, but after selecting boot macos from hackintosh zone :

https://pasteboard.co/JvAzEyO.jpg

Noting is appeare on LCD and just black.

Where i have to run  lspci -nn ? where is terminal ? I have no OS on my laptop.

I have live linux and run my paptop with it. This is result of lspci -nn:

https://paste.ubuntu.com/p/jd3m4nv2RT/

 

Edited October 14, 2020 by alt

[Hackintosh 356]

After some internet research the Pentium T7500 does not support SSE4.1, which is required in MacOS High Sierra. So unless you can replace your CPU with one that supports SSE4.1, you can't run High Sierra on that machine. The latest OS you can run on that machine is El Capitan.

When the USB kexts are based on SSE4 it can not be loaded by your processor. It might be causing still waiting for root device error.

Please confirm your processor’s Instructions Set.

You can try to Install Hackintosh Yosemite.

[alt 3]

Thanks for helping.

It is possible to install "Catalina" on my laptop?Or i can just install Yosemite?

In any case i am trying to download Yosemite 10.10.1 ISO.zip.

Edited October 14, 2020 by alt

[Hackintosh 356]

Hi, The latest macOS versions requires SSE4+ 

So my advice would be to Install Yosemite.

Catalina requires SSE 4.2 so you can not Install on this laptop.