overtanned 1 Posted October 1, 2020 Hello, I'm using Catalina on my Desktop PC. Everything works fine, managed to install all the other audio drivers and stuff. But the only problem is the GPU, it detects Intel HD 4600 but the vram is only 3 MB. I have tried each one of this: Change GFX to IGPU WhateverGreen.kext and Lilu.kext IGPEnabler=Yes, GraphicsEnabler=No Change Fake Id to 0x0d220003 FakePCIID.kext and Intel_HD_Graphics.kext But none of them are working, Graphic kexts are not loaded and still stuck at 3 MB. Any other ideas? Thank you before 1 Share this post Link to post Share on other sites
Hacintosh 318 Posted October 1, 2020 Yes, Set DVMT to Maximum in BIOS/UEFI Settings Share this post Link to post Share on other sites
overtanned 1 Posted October 1, 2020 1 hour ago, Hackintosher said: Yes, Set DVMT to Maximum in BIOS/UEFI Settings I tried, still 3 MB Share this post Link to post Share on other sites
Hacintosh 318 Posted October 1, 2020 You are not using the Pen drive to boot right? Also try to reset NVRAM from Clover menu. Press F1 for Help. Share this post Link to post Share on other sites
overtanned 1 Posted October 2, 2020 (edited) 9 hours ago, Hackintosher said: You are not using the Pen drive to boot right? Also try to reset NVRAM from Clover menu. Press F1 for Help. Nope, didn't have any pen drive or usb flash disk connected at all. Purely booted from hard disk. Tried F11 reser NVRAM still 3 MB, device ID can't be changed no matter ho much I tweaked clover config.plist and it still says no kext loaded on kernel extension info. I put the FakePCIID.kext and FakePCIID_Intel_HD_Graphics.kext on both EFI/Clover/kexts/other and Library/Extensions but why is it sti showing no kext loaded on GPU kernel extension info? I'm confused Edited October 2, 2020 by overtanned Share this post Link to post Share on other sites
