Jump to content
Slate Blackcurrant Watermelon Strawberry Orange Banana Apple Emerald Chocolate Marble
Slate Blackcurrant Watermelon Strawberry Orange Banana Apple Emerald Chocolate Marble
  • Donation Goals

    Monthly Donation - May

    Hackintosh Shop was made possible by using your donations & displaying ads which covers the running cost.

    Donate with BitCoins


    $20.00 of $100.00 Donate Now

15 files

  1. Restore Big Sur

    This package will restore "Hackintosh Shop Big Sur.dmg" to a flash drive.
    All the partitions and data in the destination volume/drive will be completely erased. Do not select a volume from a hard disk. If you select a volume from the hard disk, Hard disk will be completely erased. You are responsible for your data.  
    Use an empty 16GB+ USB. Be careful when selecting the destination volume. The restore process may take longtime, It depends on your USB storage speed. Read guide from bit.ly/HackintoshBigSur  
    If this tool helped you in a way, Consider a Donation.



  2. Kext Utility

    Super speed repair permissions for all system folders: /System/Library/Extensions and /Library/Extensions. Starts a update (rebuild) system caches. Starts a update (rebuild) system kernelcache_* for OS X with Extensions.mkext standard cache file (OS X 10.6). Install multiple kext files simultaneously. Kext Utility.app/Contents/Resources/KU_config.plist for ON|OFF some KU functions. KU can automatically add/remove boot args: "-v" for verbose boot, "kext-dev-mode=1" for load unsigned kexts in MAC OS X "Yosemite" and "rootless=0" for perform any repair permissions operation for system files in MAC OS X "El Capitan" in com.apple.Boot.plist and Unbelievable! in NVRam. Patch msdosfs.kext Info.plist for add OSBundleRequired="Console". That provides access to an EFI partition in single user mode (disabled for 10.10 and up). Update a records about the unsigned installed kexts in the AppleKextExcludeList.kext (disabled for 10.10 and up). Pack kext files to mkext cache file. UnPack mkext cache files.. Note: You must disable SIP in order to open Kext Utility Application.



  3. Nvidia Web Driver Auto Installer

    Nvidia MacOS Driver Installer automatically tries to install the correct version of web-driver aka Nvidia Alternative Driver for your macOS.
    You should configure Clover or Chameleon to make Nvidia web driver to function correctly in Hackintosh/Macintosh. This step is not necessary for any Genuine Macs. This installer can be used in Macintosh & Hackintosh, doesn't do any harm.
    Auto-Install Nvidia alternative-drivers Copy Correct Webdriver Package to Desktop IMPORTANT NOTICE:
      ● The Installer may requires System Preferences to be launched during the installation process. Do not manually close System Preferences until after clicking Allow in the Security & Privacy Preferences, later in the process.
    ● The Installer requires rebooting the system after the installation process. Do not launch any other applications until the process is complete and the system is rebooted.
    This software package contains:
    ● A driver designed for your NVIDIA graphics card.
    ● A preference pane in System Preferences that includes options to:
          Switch between the NVIDIA Web Graphics Driver or Default macOS Graphics Driver.       Enable Error Correcting Codes (ECC) on supported graphics cards.       Automatically check for NVIDIA software updates for your graphics card.       Manage Developer options for the Graphics Driver.  ● An optional menu bar item that provides easy access to the most common preferences.
    If, for any reason, you are unable to boot your system to the desktop and wish to restore your original drivers, you can do so by clearing your Mac’s NVRAM. To clear NVRAM, power on your Mac and hold down Command (⌘), Option, P, and R simultaneously before the gray screen appears. Keep the keys held down until you hear the startup chime for the second time. The system will now boot with the original drivers restored.
    This may also reset some of the options you have selected in the NVIDIA Driver Manager.  If you clear your Mac’s NVRAM, it is recommended that you open the NVIDIA Driver Manager and review your settings after your system has rebooted.  



  4. TransMac

    Apple File System (APFS) volume read support. Open Mac APFS/HFS/HFS+ format disk drives, flash drives, CD/DVD/Blu-ray media, HD floppies, dmg, dmgpart, sparsebundle and sparseimage files. Copy files to Mac HFS+ disks and dmg images. Format as HFS+ for Mac . Save and restore images of disks and flash drives. Create, compress, expand and split dmg files. Built in burner functionality to burn ISO and dmg files directly to CD/DVD/Blu-Ray. Read Mac multisession and hybrid CDs. View partition layout. System requirements: Any version of Windows 10, 8, 7, Vista or XP



  5. Restore Catalina

    This package will restore Hackintosh Catalina Installer to Pen drive.
    All the partitions and data in the destination volume/drive will be completely erased. Do not select a volume from a hard disk. If you select a volume from the hard disk, Hard disk will be completely erased. You are responsible for your data.  
    Use an empty 16GB+ USB. Be careful when selecting the destination volume. The restore process may take longtime, It depends on your Pen drive speed.



  6. Restore Mojave

    This package restore Hackintosh Mojave Installer into a Pen drive.
    All the partitions and data in the destination volume/drive will be completely erased. Do not select a volume from a hard disk. If you select a volume from the hard disk, the Hard disk will be completely erased. You are responsible for your data. Note:
    Use an empty 16GB+ USB. Be careful when selecting the destination volume. The restore process may take a long time, It depends on your USB storage speed.  



  7. Clover Configurator

    Clover Configurator is an application to edit and generate Config.plist files of Clover Bootloader.
    Create your own Clover EFI config files via a streamlined and well organized graphical user interface.
    Thanks to its easy design, finding your way around the Clover Configurator application is very easy. Simply navigate to the available sections and adjust specific parameters.
    Easily modify the parameters of your Clover EFI configuration file.
    This utility keeps the Clover EFI parameters organized into various sections, you can start by modifying the ACPI parameters, you can personalize the boot mode, adjust the CPU performance, disable certain drivers, and etc. When you are done with your settings, navigate to the built in generator to create a config file that will provide a working configuration file for your Clover EFI boot-loader.



  8. IINA The modern media player for macOS

    IINA is born to be a modern macOS application, from its framework to the user interface. It adopts the post-Yosemite design language of macOS and keeps up the pace of new technologies like Force Touch, Touch Bar, and Picture-in-Picture.
    Features of IINA
    Picture-in-Picture: IINA supports the native Picture-in-Picture mode, enables you to enjoy either local or online videos without being distract Dark Mode: IINA ships with a carefully crafted user interface for the macOS Mojave dark mode, which includes adjusted colors, icons and textures, providing a sleek and unified look. Plays anything: Powered by the open source media player mpv, IINA can play almost every media file you have. With the support of youtube-dl and our browser extensions, you can also play a variety of online streams in IINA via one click. Free, open source, in active development: Written in the Swift programming language, IINA is free and open-sourced under the GPLv3 license. Please feel free to contribute it by opening an issue, sending a feature request or a bug report on GitHub or by email. More Features:
    Touch Bar System Media Control Customizable UI Online Subtitles Music Mode Mouse & Trackpad Gestures Thumbnail Preview Plugin System Browser Extensions.



  9. Mount EFI

    Mount EFI is a simple application to mount EFI Partition on Mac.
    Mount EFI uses low resource, memory efficient and very easy to use application to mount EFI partitions.
    Features of Mount EFI:
    Launch at Login option Shows notifications on disk actions Percentage bars show space used on mounted partitions Drag the position of the splitter to adjust the table views Shows EFI disks to mount / unmount and open in Finder Shows disk icons and color-coded partition scheme Shows boot EFI partition (uses IODeviceTree:/chosen/boot-device-path if IODeviceTree:/options/efi-boot-device is unavailable) Shows link for APFS containers to physical store and vice versa Shows device name if media name is not available Mount / unmount, eject and open context menu for partition scheme table



  10. KCPM Utility Pro

    KCPM Utility Pro is a 5 in 1 system maintenance application written in Swift that supports
     Installing Kexts Repairing Permissions Rebuilding Caches Configuring System Integrity Protection (SIP) Setting Up BooterConfig and More.   
    Key Features:
    Install Kexts to /Library/Extensions. Install Kexts to /System/Library/Extensions. Install Kexts to /Extra/Extensions. Show Kexts version, path and more. Backup Kexts that will be replaced. Rebuild System and Kernel Caches. Repair Permissions of the whole system partition. Configure SIP (*5) and BooterConfig via either NVRAM (*3) or your boot loader configuration. (Clover & Chameleon supported) (*4) Install Command Line Tools that allow you easily maintain your OS X in Terminal/Single-user mode/OS X Recovery and more. Support Auto-Update. Support Real Macs, Hackintosh Builds (Clover, Chameleon, Ozmosis) DragN' Drop Function. (Starting from V3.3) EZMode – Express Kexts Installation Mode that helps you install kexts, repair permissions and rebuild caches without your attendance. (Starting from V5.0) Support custom kexts backup folder. 



  11. Kext Wizard

    Kext Wizard with Pre-linked Kernel Support is an application to Install Kernel Extensions known as Kexts in short terms.
    Easy to install manage your kernel extensions
    The Kext Wizard utility installs like most Mac apps, by simply dragging and dropping its icon in the Applications directory. By default, Kext Wizard is running in system version independent mode, but via the Extra menu you can select a specific operating system .
    You can access the Kext Wizard’s capabilities by navigating different tabs that are contained in the app’s main window. The panels have self explanatory names (Maintenance, Installation, Unpacker, Kext Info, and Loaded) and you can switch between them by using unsophisticated keyboard combinations. View, manage, and install kernel extension with minimal effort
    Kext Wizard is able to repair the permissions and rebuild the cache for the kernel extension that are installed in the Extra and in the System/Library/Extensions folders. Note that you can manually select the target disk.
    In addition, the utility offers you the possibility to view the architecture and dependencies of any kernel extension, to install Kext files, or to check and unpack Mkext contents. Lastly, you have the option to see a complete list with all the kernel extensions that are currently loaded and export it to a text file. Simple but powerful solution for installing and managing kernel extensions
    Kext Wizard proposes a minimalist graphical user interface that enables you to effortlessly manage kext files in an intuitive manner: you can repair permissions, rebuild cache, install new extensions, or unpack Mkext contents.
    Moreover, the app can provide architecture and dependencies details for a user selected kext, and creates a list will all loaded kexts.  
    Version 3.7.12 supports rebuilding Pre-linked kernel



  12. Mounty for Mac NTFS

    Mounty is a Free NTFS Enabler Application for macOS which mounts NTFS as writeable in macOS.
    Easy: A menu icon; You will be notified if there is any volume connected to the computer which is NTFS formatted and ready to re-mount in read-write mode. Light: A simple design; Mounty for NTFS comes without any decorations. No additional driver will be installed. It simply makes use of the build-in mechanisms already provided by Mac OS X Mavericks - no strings attached.  
    Volume not re-mountable.

    This can happen when the USB stick is not cleanly unmounted from the Windows PC. If you simply unplug the USB stick from PC without using the little tray icon to detach the hardware correctly, the volume will be marked as "not cleanly unmounted". There might be some dirty sectors left and macOS will not be able to re-mount in read-write mode for that reason.
    Suddenly all my files disappeared.
    This is usually happen when not all files are written properly due to an unmount operation not finishing. The NTFS partition might be marked as "dirty" and the Apple NTFS driver cannot recover from that situation. Mounty will not delete anything by itself, please try to restore your files on a Windows PC using usual recovery softwares, i.e. chkdsk command line utility.
    Sometimes the files are grayed out and cannot be modified anymore.
    This is because the file has extended attributes, refer to the Manpage of xattr for further explanation. If you open the file path in terminal application, you can list the attributes with ls -l@ <filename>, and remove those attributes with xattr -d com-apple.<attribute> <filename>, i.e.: xattr -d com.apple.FinderInfo testfile.txt
    Unable to re-mount in read/write mode when trying to mount Windows 10 partition
    If you try to mount a Windows System partition, Mounty might fail when Hibernation feature is enabled. There is a Fast Start feature in Windows which might be enabled by default, and this is causing the drive to be locked. Within Windows running, you need to run the command powercfg /hibernate off in an admin powershell and restart Windows to disable this feature and remove the lock to enable it for Mounty.
    Change log of Mounty for NTFS #### Version 1.9 - bug fix for crash when Volume does not contain UUID (e.g. MBR Disk) - Note: Old Devices which does not contain UUID cannot tracked for auto-mount - Russian Credis Page added (again, thanks to Anton) #### Version 1.8 - new feature "Automount" - You can mark a volume as "automount" and no notification will be sent, it will be mounted automatically - fixed equal volume name bug - added / updated localizations (Russian added - thanks to Anton, Chinese edited - thanks to Barry) - cleanup and improvements for using either UUID or BSDdeviceNode for identifying volme #### Version 1.7 ### Localization updates and new ones: - Portuguese (thanks to Carlos) - Chinese corrections, thanks to Barry - new Chinese Traditional, thanks to Barry - Brazilian (thanks to Bruno) - Spanish (thanks to Daniel) - Korean (thanks to Kim Jinbong) As far as I have tested, this version runs perfectly on Mac OS High Sierra. #### Version 1.6 ### Localizations Updates: - thanks to the community, bunch of corrections were made to improve the Google translations of - Chiniese (thanks to Gerald and Yang) - Italian (thanks to Emanuelle and Helmo) - French (thanks to Dominique) - new: Dutch (thanks to Ferdi) - Fixed a bug with help window, which is now on top of open window stack #### Version 1.5 - Localizations (incomplete and made by Google. If you want to contribute, please download the Localization String File, correct it, and send new version to me). #### Version 1.4 - Fixed compatibility bug for macOS 10.12.5, thanks to Apple Engineering for help - Introduced new state 'Mounty is operating ...' - when a re-mount of a big partition takes longer time this will prevent user from issuing re-mount again #### Version 1.3 - Smaller Tray Icon - Fixed some possible memory leaks - Added modal alert when drive has spaces in names: - I am using DADiskMountWithArguments API from Disk Arbitration framework and when there are spaces in volume name the remount action will fail with unknown error. I you have an ideas how to solve it, please let me know #### Version 1.1 The Appstore Sandbox restrictions does not allow sandboxed apps to re-mount external volumes. We have rejected Mounty from Mac Appstore for that reason and decided to distribute it for free now, without Sandbox capability. Mounty uses Apple's Notification Center to issue notification whenever a NTFS volume to re-mount is detected. If you want to re-mount a volume from a notification please change the alert style to "Alert" for Mounty from Notification Center Settings in System Settings application.  



  13. MBBench 32 bit Only

    MBBench a useful application to view check speed of SSD, Hard Disks, USB disks and DVD drives
    Can be used to check speed of Pen drives and SD Cards
    It only works with old macOS versions, it does not support 64bit.



  14. DesktopUtility

    Quick access to useful system tasks
    Hide your desktop, toggle file visibility, show the User Library, force empty the trash, or restart the Finder/Dock/Menubar easily and conveniently.



  15. The Unarchiver

    Opening rar files on mac made easy with TheUnarchiver.
    It’s times more powerful than the native macOS utility and supports infinitely more archive formats.
    Takes a few clicks to install and set it as a default app for all archive files. The Unarchiver for Mac is free. No in-apps for additional features. If your archive is named with non-Latin characters, it’s not a problem.



  • Create New...